Exhaust Peugeot 107 (2005-2014)

The Peugeot 107 offers a variety of exhaust systems including stainless steel sport silencers, complete catback lines, downpipes, decatalyzers, and universal parts. Sports options available provide larger diameter outlets (73-90mm) for a deeper, sportier sound, while standard options replace original parts maintaining factory specifications.

Exhaust parts are compatible with gasoline engines 1.0 12V 68hp, 1.4 8V 75hp, and diesel engine 1.4 HDi 55hp. It's important to select parts matched to your engine model and year (usually 2005-2012) for compatibility and regulatory compliance.

Common indications of exhaust failure include abnormal noise, loss of engine power, white smoke emissions, visible rust or holes, and fluid leaks. Temporary fixes like high-temperature tape or sealant can be used until a full replacement is installed, especially if corrosion is severe.

• Abnormal sounds from the exhaust
• Loss of power or engine performance
• White smoke or unusual emissions
• Visible rust or holes in the system
• Oil or liquid leaks near exhaust components

Rear silencers are generally advised to be replaced between 60,000 and 130,000 km, often checked during vehicle safety inspection.

Installation involves removing the rear silencer by slipping off rubber hangers, removing the front section including the lambda sensor and central silent-block, then mounting the new line by greasing and aligning pipes, tightening clamps, and refitting sensors and seals. Heat shielding clearance should be checked carefully.

• Remove rear silencer by disengaging rubber supports
• Detach front section including lambda sensor and sealing ring
• Grease and install new pipes aligning marks accurately
• Tighten clamps with a torque wrench to recommended 13mm setting
• Ensure no contact with heat shields or protective parts

The difficulty level is considered easy for those with basic mechanical skills and common hand tools.

Parts for the Peugeot 107 should be selected to comply with European regulations and homologation standards such as E24-103R certification. This ensures emissions compliance and technical compatibility. Always verify exhaust parts are approved for your vehicle and region, especially when replacing catalytic converters or DPF equivalents.

• Check E24-103R certification or equivalent
• Confirm technical compatibility with vehicle engine and emissions standard
• Use only copper connectors for pipes upstream of catalytic converters
• Replace lambda sensors as recommended (usually after 80,000 to 100,000 km)

Non-certified parts may cause failed inspections or legal issues.

Regular inspections during vehicle maintenance help detect corrosion or leaks in the exhaust. Silencers typically last 60,000 to 130,000 km before replacement is advisable. Follow manufacturer instructions strictly: avoid pushing or towing the vehicle without precautions, replace spark plugs and engine oil regularly, and check engine operation at certified centres to maintain exhaust longevity and security.

• Replace rear silencer every 60,000 to 130,000 km
• Do not start engine with ignition wires open or use improper techniques
• Regularly replace spark plugs and engine oil
• Check engine functioning regularly at technical control centres
• Avoid excessive short journeys causing incomplete DPF regeneration (diesel models)

Proper maintenance ensures safety, performance, and extended lifetime of your exhaust system.

Technical support is provided primarily via email to ensure accurate tracking and documentation of your requests. Installation guides are available for many parts. For professional customers, direct factory support is offered. Contact customer service for warranty claims, technical questions, or to discuss order terms and conditions.

• Contact official support email for technical assistance
• Use provided installation manuals and video tutorials
• Professional support available for PRO customers
• Verify all safety and usage conditions before installation

Always provide vehicle details such as VIN or engine model when requesting support to get accurate information.

Exhaust parts come with a 3-year warranty limited to 100,000 km, starting from the date of receipt. Warranty validity requires professional installation following manufacturer instructions including replacing all gaskets, sensors, and injectors. Misuse or negligence, such as clogged DPF, voids warranty. Returns for unused products are accepted within 30 days under strict conditions including original packaging and no assembly traces.

• 3-year warranty limited to 100,000 km usage
• Professional installation required for warranty coverage
• Return unused parts within 30 days with original packaging
• Warranty excludes damage caused by misuse or neglect
• Use of proper fuel (unleaded petrol for catalytic converters) is mandatory

Always review the full terms and conditions before purchase and contact support if in doubt regarding your rights or product use.

For any questions about conditions, rights, or contacting support, please refer to official resources and do not hesitate to inquire for detailed assistance.