Ford Probe Catalytic Converter 2 (Ii) (1993-1997)

The "Catalytic Converter 2" mainly refers to the catalytic converters on these Ford Probe II (MK2) petrol engine versions:

• 2.0 16V (2.0i 16V FS/KF1 engine, approx. 115-116 hp), produced roughly 1993-1998.
• 2.5 V6 24V (KL engine, 163 hp), with models generally up to 1995.

The term corresponds specifically to key catalytic converter types used in these engines.

Two primary lengths exist for the 2.0 16V catalytic converters:

• Short catalytic converter (approx. 400 mm length) produced roughly 03/1994 to 09/1995, weighing around 2.2 to 2.8 kg. It meets up to Euro 2 pollution standards.
• Long catalytic converter (approx. 440 mm length) produced roughly from 10/1995 to 1997-1998, heavier at around 5.2 kg, also compliant with Euro 2 standards and typically more durable due to larger internal volume.

Both feature ceramic substrates and are designed for the FS/KF1 engine codes.

The 2.5 V6 24V engine uses catalytic converters typically around 440 mm in length and weighing approx. 5 kg. They comply with Euro 1 to Euro 2 emission standards, with some aftermarket options rated Euro 4 for enhanced performance.

• Generally supplied for models up to October 1995.
• Usually ceramic substrates with stainless steel housings.
• Includes recognized compliance markings such as E-Mark and E9-103R type approval.

This converter type fits the KL engine and aligns with pollution regulations during the Probe's production years.

Ford Probe 2's catalytic converters primarily meet the Euro 2 standard, reflecting the pollution control requirements of the 1993-1998 European market.

• Some parts also fit Euro 1 or offer aftermarket Euro 4 performance improvements.
• Frequent markings include E-Mark and E9-103R (European type approval) certifying regulatory compliance.
• Note: "Non-approved" markings on some parts refer often to local legal nuances but do not imply lower Euro 2 compliance.

Always verify local regulations and ensure compatible installation for legal road use.

The key features for Ford Probe catalytic converters include:

• Substrate: High-quality ceramic honeycomb coated with precious metals for emission reduction.
• Housing: Stainless steel (typically INOX 409) for durability and corrosion resistance.
• Size: Two common lengths for 2.0 engines (400 mm short and 440 mm long), about 2.2-2.8 kg and 5.2 kg respectively; 2.5 V6 units are around 440 mm and 5 kg.

These characteristics contribute to compliance with emission regulations and reliable vehicle performance.

Choosing the right catalytic converter involves several key checks:

• Identify your engine variant: 2.0 16V (FS, KF1, JH20 engine codes) or 2.5 V6 24V (KL engine).
• Check manufacture date: before or after October 1995 to determine short or long 2.0 catalytic converter length.
• Verify emissions compliance (Euro 2 or better) and ensure parts bear proper markings (E-Mark or E9-103R).
• Consider quality and weight differences, as longer converters generally offer better durability.
• Consult technical details such as length, weight, and required installation kits to ensure proper fitment.

Correct identification helps maintain engine efficiency, comply with pollution standards, and avoid check engine light issues.

Some indications your catalytic converter might require replacement or servicing include:

• Illumination or flashing of the catalytic converter warning light on your dashboard.
• Possible damage to thermal protective shields around the converter causing heat retention issues.
• Reduced engine performance, misfires, or unusual exhaust smells.
• Failed emissions tests due to decreased converter efficiency.

Prompt diagnostics and replacement with compliant, high-quality catalytic converters ensure sustained vehicle performance and emission compliance.

For comprehensive technical details, compatibility checks, and professional guidance consider the following:

• Consult official manufacturer datasheets and vehicle documentation for engine codes and emission standards.
• Use manufacturer or specialized supplier catalogs for exact dimensions, mounting instructions, and installation kits.
• Reach out to authorized technical support for help with installation, measurements, and engine compatibility via email or official channels.
• Utilize expert advice to ensure selected catalytic converters meet all legal and technical requirements for your Ford Probe 2 model.

Using certified parts designed with advanced ceramic substrates and stainless steel ensures durability, performance, and compliance.